Write a Review

Replacement compression knobs for RockShox suspension forks.

Reserve 30 wheels feature a 30mm internal width that supports 2.3-2.5" tires, and the thick rim beads stand up to the abuse of tough, rocky, steep tracks ridden at elite speed. While DH rims see greater single impacts, nothing beats the full weekend of regular abuse that an EWS race dishes out. To say nothing of the infamous 'Anti-Grip' and the rocks buried within the moondust in the Andes of Chile. - Designed for DH riding and racing - Carbon fiber construction with 4mm asymmetric offset - Reinforced rim bed for impact resistance - Rated for e-bike use - Ships with rim tape installed, tubeless-ready valves, and cards identifying the builder of each of your wheels - Backed by a lifetime warranty

Spare parts for Quarq's ShockWiz automated suspension tuning device. - Contains a rubber mounting boot, four zip ties, plastic cap and two o-rings.

Value HD Series wheels are built with everyday use in mind, for heavy-duty applications. Featuring premium double wall rims, stainless steel spokes, and sealed hubs, the Value HD Series support a heavier load capacity and an expanded range of fitments. - Rim Brake - Stainless Spokes - 36 Hole

This 8mm pedal wrench is chrome plated for strength, has a dual compound handle for extra grip and comfort, and has an additional ball driver on the bottom of the handle for fast pedal installation and removal.

- Medium profile and tread spacing for riding quickly and confidently over a mixed variety of terrains, from hard to soft, whether for dry or wet - SpeedGRIP Compound formulation for on and off-road rolling efficiency coupled with high tear resistance and high wet grip - High-strength woven Nylon fabric from bead to bead for added cut and puncture protection - Multi-ply 127tpi Nylon casing construction - Tubeless-ready aramid folding bead optimized for wide rims and lower pressure riding

- Gravel-racing specific tire, derived from our experience in the biggest competitions around the world and feedback from Pro athletes. - Tread design inspired by the Scorpion XC RC. - Key features: Higher average speed on straight and fast lines, improved lateral grip when off-road cornering.

The legendary Pearl Izumi SELECT Pursuit Tri Short delivers comfort, durability, and a great fit. The SELECT Tri Short is ideal for both training and racing for all levels of triathletes. - SELECT Transfer Dry fabric sets the benchmark for compression and moisture transfer - Flatlock seams provide superior abrasion resistance - Plush elastic silicone leg gripper - Stretch draw cord for superior comfort and fit - One easy access envelope pocket - New TRI quick-dry chamois - Reflective elements for low-light visibility - 8 1/2-inch inseam (size medium) - 88% nylon 12% LYCRA elastane/UPF 50+; Imported

This Pearl Izumi classic women's short features a high waist band, anatomic fit, and superior chamois to keep you comfortable every minute you spend in the saddle. - SELECT Transfer fabric sets the benchmark for compression and moisture transfer - Silicone leg grippers hold hems in place without constriction - Women’s SELECT Pursuit 1:1 Chamois is smooth next to skin for cushioned chafe-free comfort - Reflective elements for low-light visibility - 8-inch inseam [size medium]

Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-1 FEATURES - 4mm, 5mm, and 6mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit

Park's AWS-8 Hex Wrench Set features Bondhus balldriver ends, which facilitate use when the tool is at an angle to the bolt. This is great for working in hard-to-reach areas, such as reaching water-bottle-cage screws. The AWS-8 has 4, 5, and 6mm wrenches, which are the most common bicycle bolt sizes. Plus, its Y shape and vinyl coating provide excellent leverage and comfort.

Made from tough steel and reinforced with extra material at the highly stressed wrench openings, Park’s shop-quality Pedal Wrench is built to easily install and remove pedals, and to last and last. It has 15mm and 9/16-inch precision openings to fit all pedals. And it boasts a long, round, vinyl-coated handle that won’t dig into your hand and provides optimum leverage. There's even a hole in the end of the wrench for hanging it on your toolboard.

Park's Valve Core Tool is great for tightening, removing and installing Schrader and Presta valve cores (the cores are inside the valve), and also Presta valve extenders that have 5mm wrench flats. It's a handy tool to save a tube when all that's wrong is a broken valve, and it also lets you remove valves to easily insert sealant.

Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.

Origin-8's Bat Wing Handlebar delivers futuristic looks and a wrist-friendly 25-degree sweep. It's crafted from lightweight aluminum and features a hydroformed center section with plenty of room to mount accessories.

Improve your braking in dry and wet conditions with Origin-8's Pro-Force Post Pad Set. They fit most cantilever brakes and boast a grippy dual-compound material with channels to shed water for excellent performance and long life. They are also designed to reduce noise.

Replacement dropper post remote clamp. Can be used to convert existing clamp on the OneUp Dropper Remote. - Compatible with SRAM MatchMakerX (MMX) or Shimano I-Spec EV (M9100) brake mounts. - Does not contain remote body.

The Maxxis Rekon Race is a semi-slick XC race tire that features the lowest profile tread in our XC line. It is a great choice for dry XC trails and short track racing.

Combining style, technology and ultimate value, the Rap II series bike multi tools provide unmatched performance at their price points. Engineered and manufactured in-house, these multi tools feature a number of innovative features. The ergonomic side-plates are machined from lightweight aluminum, anodized black and offer a custom magnetic holder for an emergency quick-link. The steel tool bits are now longer and introduce our Black Anti-Corrosion technology, which provides superior corrosion resistance. Compact and versatile, these mini tools are built to last and designed to efficiently get riders back on the road or trail. - Ergonomic forged aluminum side plates with link storage - Enhanced anti-corrosion black CRV bits wrapped - Chrome vanadium steel fastening hardware - Hex 3/4/5/6mm - T25 - Phillips - 82g

The MX332 is a lightweight and versatile race shoe made from Helcor Leather that is well-suited for Cross Country racing, Cyclocross or Gravel biking. MX Race Last –Featuring a slightly narrower toe box & tighter heel than the Competition last and less overall volume than the Sport last. Designed for a slimmer fit & most suitable for racing. Upper: Lake SPD compatible 100% Carbon Fiber Sole with real rubber tread and provisions for replaceable toe spikes. Outsole: Helcor Leather for extreme durability. Outlast temperature-regulating heel & tongue liner. Heat moldable internal Thermaform Carbon Fiber heel counter for a secure custom fit. Closure: Dual Side mounted Push/Pull BOA IP1 lacing systems.

When your solo ride turns into a weekend expedition with friends, the NV Base 2.0 Add-On lets you increase the NV Base 2.0 carrying capacity from two to four bikes in less time than it takes your friends to decide who gets to sit up front. - Adjustable front tire cradle system - Fully integrated cable locks - Trail Doc compatible - Front tire ratchet design with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - Premium matte powder coat - Compatible with 2-inch NV Base 2.0 - Increases 2-inch NV 2.0 carrying capacity to 4 bicycles weighing up to 40 pounds each - Holds wheelbases up to 48-inch and tires as large as 4.8-inch - Quick change from 2 to 4 bikes

The Piston® Pro features some of the same great features as The Piston® Pro X minus a few bells and whistles. Features like all metal construction, OneTap™ hydro-pneumatic tire arms that make no contact on the bike frame, and tool-free wheel chock slides. But don't worry, this thing still sings. - All metal construction - OneTap™ hydro-pneumatic tire arms - No frame contact - Patented FastFit™ tool-free wheel chock system - Patented PedalPivot™ - Patented Flatlock™ hitch cam - No Worries Limited Warranty - 2 – Bike capacity (Add-ons Available) - 67 lbs. per tray on 2” 2-bike, 60lbs. for 1.25” version - 42 lbs. per tray on chassis mounted RV hitch (see limited warranty for details) - 53” Max wheelbase - 5” Max tire width

- End link locking point for extensive holding power - 4-sided 3t manganese steel chain links - 4 digit resettable combination over 10,000 codes - Patent pending lock head design - Combo Safe Program - Product dimensions: Length 120cm - Product weight: 4.50 lbs

- Ultimate XC Racing tire with lots of speed and grip - Well suited for a variety of riding conditions. - Fast accelerating, hard-pack cross-country tire - Numerous knobs provide multiple contact points with the ground

How do you improve on the #1, top-selling helmet on Earth? Carefully, and with meticulous attention to detail. This updated helmet boasts a revised silhouette, redesigned integration of the Mips® Brain Protection System, and improved cooling power. Whether you're headed for off-road adventure or just a relaxing spin, the Fixture™ Mips II offers the right combination of value, performance, and classic design that can't be beat. With a strong and striking style, quick-dry padding, a simple and durable Roc Loc® Sport fit system, and reflective rear decals, every rider demand has been addressed. After all these updates and improvements, you'd be forgiven for thinking we doubled the price of this second-generation Fixture, but the Fixture Mips II retains its position as the value leader. FEATURES - INTEGRATED MIPS® BRAIN PROTECTION SYSTEM — All Giro helmets are designed to reduce as much energy as possible while meeting and exceeding stringent safety standards. The goal of Giro's Integrated Mips®-equipped helmets is to reduce rotational forces while enhancing fit and comfort by combining the Mips slip plane with the helmet's adjustable fit system. Giro believes that helmets equipped with this technology can reduce the amount of rotational force that may be transferred to rider's brain in certain impacts. Learn more about Mips in the video above. - IN-MOLD CONSTRUCTION — In-Mold Construction fuses a tough polycarbonate outer shell with the helmet's impact-absorbing foam liner. The fusion process allows for better ventilation systems, making in-mold helmets lighter and cooler than traditional helmets. - ROC LOC® SPORT FIT SYSTEM — The Roc Loc® Sport fit system offers easy one-handed operation with a 7cm adjustment range. Its confident clicking feel and sound lets riders know that the helmet is adjusting to a comfortable fit. With comfort similar Roc Loc 5 and ponytail compatibility, the new Roc Loc Sport fit system brings premium function to sport level helmets. - REFLECTIVE DETAILS — Reflective Details enhance visibility at nighttime or in low-light conditions when illuminated by a light source, such as headlights, by returning the light back to the source and reaching the driver's eye. - UNIVERSAL FIT™ SIZING — Our Universal Fit helmets are sculpted to look good and fit great for almost anyone on the first try. By developing proprietary shell sizes based on specific customer groups, and combining them with an easily-adjustable fit system, it's easy for you get the right fit, straight out of the box, without the hassle or expense of trying multiple sizes. HIGHLIGHTS - Quick-dry padding Complies with the US CPSC Safety Standard for Bicycle Helmet for Persons Age 5 and Older

Game changer: super light, tapered fit—this pant climbs as well as it descends.

Replacement headset bearings from FSA. - Compatible with most Trek MTB integrated headset systems - Sealed bearing for long life - Compatible with Knock Block Headsets

Rebuild seal kits for Fox rear suspension service and repair. - Includes parts needed for rebuild

The proven Transfer seatpost gets lighter and tighter. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. Performance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, new patent-pending head design and proven internals as the Factory Series but have a black anodized upper. - Cable actuated with tool-free quick disconnect for easier installation and removal - Low lever force provides consistent actuation pressure even with saddle weighted or unweighted - Easy to modulate return speed with lever - Remote lever sold separately - 0mm offset

The new first choice of the Marathon World Champion, Alban Lakata. OrthoCell-Inlays in the seating area generate the best possible pressure distribution. The innovative OrthoCell material ensures maximum reset force and is also more durable and lighter than gel. Specifically designed for men and intended for MTB touring, trail and all-mountain riding, this seat features an anatomically optimized relief channel in the sensitive perineal area and an athletic but light AirCell-Padding. The flat tail and the Y-shape guarantee full freedom of movement when in the typical mountain bike position. Sliding flanks help reduce friction when pedaling. - Rail Material: Titanium - Clamp Style: Std Rails - Material: Synthetic